Yealink W56P - Checking System Status

41
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
ldap.display_name = %cn
The cn of the contact record
is displayed on the LCD
screen.
LDAP
ldap.version
2 or 3
3
Add
It configures the LDAP
protocol version supported
by the IP DECT phone. Make
sure the protocol value
corresponds with the
version assigned on the
LDAP server.
common.
cfg
LDAP
ldap.call_in_l
ookup
0 or 1
0
Add
It enables or disables the IP
DECT phone to perform an
LDAP search when receiving
an incoming call.
0-Disabled
1-Enabled
common.
cfg
LDAP
ldap.ldap_sor
t
0 or 1
0
Add
It enables or disables the IP
DECT phone to sort the
search results in
alphabetical order or
numerical order.
0-Disabled
1-Enabled
common.
cfg
Syslog
syslog.log_up
load_period
Integer from
30 to
2592000
30
Add
It configures the period of
the log upload (in seconds)
to the provisioning server.
Example:
syslog.log_upload_period =
60
Note: It works only if the
value of the parameter
“syslog.mode” is set to 2
(FTP/TFTP Server).
common.
cfg
Syslog
syslog.ftp.pos
t_mode
1 or 2
1
Add
It configures whether the
log files on the provisioning
server are overwritten or
appended.
1-Post Append
2-Post Stor (not applicable
common.
cfg