Yealink W56P - Turning Handset On;Off; Adjusting Volume

43
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
Note: It works only if the
value of the parameter
“syslog.mode” is set to 2
(FTP/TFTP Server).
Syslog
syslog.mo
de
syslog.mode
0, 1 or 2
0
Change
It configures the IP DECT
phone to export log files to
the local system or the
syslog server.
0-Local
1-Server
2-FTP/TFTP Server
common.
cfg
SIP
sip.disp_incal
l_to_info
O or 1
0
Add
It enables or disables the
handset to display the
identity contained in the To
field of the INVITE message
when it receives an
incoming call.
0-Disabled
1-Enabled
common.
cfg
SIP
sip.limit_serv
er_name
String within
256
characters
Blank
Add
It configures the string that
must be contained in the SIP
server address.
common.
cfg
SIP
sip.tls_listen_
port
Integer from
1024 to
65535
5061
Add
It configures the local TLS
listen port.
common.
cfg
SIP
sip.nat_stun.
enable
0 or 1
0
Add
It enables or disables the
STUN (Simple Traversal of
UDP over NATs) feature on
the IP DECT phone.
0-Disabled
1-Enabled
common.
cfg
SIP
account.X.
advanced.
timer_t1
sip.timer_t1
Float from 0.5
to 10
0.5
Change
It configures the SIP session
timer T1 (in seconds) for
account X.
T1 is an estimate of the
Round Trip Time (RTT) of
transactions between a SIP
client and SIP server.
common.
cfg
SIP
account.X.
advanced.
sip.timer_t2
Float from 2
to 40
4
Change
It configures the SIP session
timer T2 (in seconds) for
common.
cfg