Yealink W56P - Page 46

46
YEALINK NETWORK TECHNOLOGY CO.,LTD.
www.yealink.com
the corresponding input
method is enabled via the
handset at the path:
OK->Settings->Display->Inpu
t Method.
Call
Display
phone_settin
g.called_part
y_info_displa
y.enable
0 or 1
0
Add
It enables or disables the
handset to display the called
contact information when it
receives an incoming call.
0-Disabled
1-Enabled
common.
cfg
Call
Display
phone_settin
g.call_info_di
splay_metho
d
0, 1, 2, 3 or 4
0
Add
It configures the call
information display method
when the handset receives
an incoming call, dials an
outgoing call or is during an
active call.
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display
name<sip:xxx@domain.com
>)
common.
cfg
AutoP_DH
CP
auto_prov
ision.dhcp
_enable
auto_provisio
n.dhcp_optio
n.enable
0 or 1
1
Change
It triggers the DHCP Option
feature to on or off.
0-Off
1-On
If it is set to 1(On), the IP
DECT phone will obtain the
provisioning server address
by detecting DHCP options.
common.
cfg
Call
Waiting
call_waiting.o
ff_code
String within
32 characters
Blank
Add
It configures the call waiting
off code to deactivate the
server-side call waiting
feature. The IP DECT phone
will send the call waiting off
code to the server when you
deactivate call waiting
feature on the IP DECT
common.
cfg