Local Directory
To add a contact:
•
Press the OK key to enter the main menu, and
then select Directory.
•
Press the Options soft key, and then select
New Contact.
•
Enter the desired value in the Name, Office,
Mobile and Other field.
•
Press the Save soft key to accept the change.
To edit a contact:
•
Press the OK key to enter the main menu, and
then select Directory.
•
Press up or down arrow keys to highlight the
desired entry.
•
Press the Options soft key, and then select
Edit.
•
Edit the desired value in the number field.
•
Press the Save soft key to accept the change.
To delete a contact:
•
Press the OK key to enter the main menu, and
then select Directory.
•
Press up or down arrow keys to highlight the
desired entry.
•
Press the Options soft key, and then select
Delete to delete the selected entry.
Basic Call Features
Place a Call:
To place a call using a direct dialed number:
• Enter the Number into the handset using the
number pad.
Press or to place the call.
To place a call from the local directory:
• Press down arrow to access directory.
• Press up and down arrows to highlight desired
entry.
• Press or to place the call.
To place a call from the call history:
• Press the History soft key when the handset is
idle, and then select the desired number from
history list using up and down arrows.
• Press or to place the call.
To place a call from the redial list:
• Press when the handset is idle.
• select the desired number from history list using
up and down arrows.
• Press or to place the call.
Answering Calls
To answer a call, do one of the following:
• Press the Accept soft key.
• Press .
• Press .
Ending Calls
• Press .
Call Mute
•
Press Mute key during a call to mute the call.
•
Press Mute key again to un-mute the call.
*Mute key is located on lower right-hand side of handset.
Call Hold
To place a call on hold:
•
Press the Options soft key during a call, and
then select Hold.
To resume a call.
Do one of the following:
•
If there is only one call on hold, press the
Resume soft key.
•
If there are two calls on hold, press the
Resume soft key to resume the current call.
Press the Swap soft key to swap between
calls.
Call Transfer
Blind Transfer
•
Press the Options soft key during a call, and
then select Transfer.
•
Enter the number you want to transfer the
call to.
•
Press the Transfer soft key.
Semi-Attended Transfer
•
Press the Options soft key during a call, and
then select Transfer.
•
Enter the number you want to transfer the
call to.
•
Press or
to dial out.
•
Press the Transfer soft key when you hear the
ring-back tone.
Attended Transfer
•
Press the Options soft key during a call, and
then select Transfer.
•
Enter the number you want to transfer the
call to.
•
Press or
to dial out.
•
Press the Transfer soft key after the call is
answered.
To Previous Page
Loading...
Need help?
General
Weight and Dimensions
