Yealink W80B Quick Steps

Quick Steps to Start Testing Yealink W80B
Step1: Confirm the locations where you want to install Yealink W80B.
In this step, you will need a floor plan to find a place where is easy to install the screw and avoid
metal walls. If you want accurately plan the location for many bases, we have deployment and
installation guide for your reference: Yealink DECT IP Multi-Cell System Deployment Guide_V1.1.pdf
Step2: Install the bases to the location.
For more information about installation, please refer to our QSG below:
Yealink DECT IP Multi-Cell Base Station W80B Quick Start Guide_V83.30.pdf

Yealink W80B Specifications

General

Category	IP Phone
Network Protocol	SIP
Number of SIP Accounts	8
Concurrent Calls	8
DECT Technology	CAT-iq2.0
Ethernet Ports	2
Handsets Supported	Up to 30
Repeater Support	Yes
PoE Support	IEEE 802.3af
Security	TLS, SRTP
Provisioning	TR-069
Operating Temperature	0°C to 40°C
Radio Range	Up to 50 meters indoors
Codecs	Opus, G.722, G.726, G.729, iLBC
Management	Web GUI
Frequency Range	1880 MHz to 1900 MHz (EU), 1920 MHz to 1930 MHz (US)
Power Supply	PoE
Humidity	10% to 95%