NeoGate TG Series User Manual
19/62
PHONE Notification Whether enable phone notification
Number
The numbers could be set for alert notification, users can
setup multiple extension and outbound phone numbers.
Please separate them by “;”.
Example: “500;9911”, if the extension has configured
Follow Me Settings, the call would go to the forwarded
number directly.
Port Choose the GSM/UTMTS/CDMA port to dial alert call.
Attempts
The attempts to dial a phone number when there is no
answer.
Interval
The interval between each attempt to dial the phone
number. Must be longer than 3 seconds, the default value
is 60 seconds.
Prompt
Users will hear the prompt while receiving the phone
notification.
2) E-mail Notification Settings
Note: Please ensure that all voicemail settings are properly configured on the
System Settings -> Voicemail Settings page before using this feature.
Whether enable E-mail Notification
Recipient’s Name
The recipients for the alert notification, and multiple
email addresses are allowed, please separate them
by “;”.
Example: jerry@yeastar.com;jason@yeastar.com,
456@sina.com
Subject The subject of the alert email.
Email Content
Text content support for predefined variables. Variable
names and corresponding instructions are as follows:
gateway hostname:$(HOSTNAME)
attack source ip address:$(SOURCEIP)
attack dest mac:$(DESTMAC)
attack source port:$(DESTPORT)
attack source protocol:$(PROTOCOL)
attack occurred:$(DATETIME)
To Next Page
Loading...
Need help?
General
