NeoGate TA Series Installation Guide
17/20
4. NeoGate TA Series Basic Configurations
4.1 Getting an IP Address
NeoGate provides web-based configuration interface for administrator and account user. The
user can manage the device by logging in the Web interface.
Access path: http://[IP address]
User Name: admin;
Password: password
Default SIP UDP port: 5060
The NeoGate TA attempts to contact a DHCP server in your network to obtain valid network
settings (e.g., the IP address, subnet mask, default gateway address and DNS address) by default.
Please enable DHCP Server in your network to obtain the IP address.
Due to the difference of telephony interface, NeoGate TA FXS Gateway and FXO Gateway will use
different methods to check the IP address.
NeoGate TA FXS Gateway
1. Use an analog phone connected to the FXS port of the Gateway, press *** to get into the IVR
menu. Enter 1 to obtain the Gateway’s IP address.
2. If there is no DHCP server in the network, press 3 for advanced setting, and press 2 to assign
a static IP address to the device.
NeoGate TA FXO Gateway
1. Download a DeviceFound tool from Yeastar website: FindTA.rar
2. Run the DeviceFound.exe software.
3. Find the IP address by the device’s MAC address or the SN.
To Next Page
Loading...
Need help?
General
