YeeSite 36LEDs - DMX Channel Assignments; Standalone and Automatic Modes

Configuration(Standalone)
Set the product in one of the standalone modes to control without a
DMX controller. Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode
to a DMX string connected to a DMX controller. Products in
standalone mode may transmit DMX signals that could interfere
with the DMX signals from the controller.
Automatic Programs
To run the 36LEDs Par Light in automatic mode, follow the
instructions below:
-9-
7 CH
CH CH Value Function Description
CH1 0-255 Master-Dimmer
CH2 0-255 Red-Dimmer
CH3 0-255 Green-Dimmer
CH4 0-255 Blue-Dimmer
CH5 0-255 RGB
CH6 1-255 Strobe Speed
CH7 1-255 Mode
4 -CH
CH CH Value Function Description
CH1 0-255 Master-Dimmer
CH2 0-255 Red-Dimmer
CH3 0-255 Green-Dimmer
CH4 0-255 Blue-Dimmer
DMX Channel Assignments and Values