5. MAINTENANCE
Product Maintenance
Dust build-up reduces light output performance and can cause
overheating. This can lead to reduction of the light source’s life
and/or mechanical wear. To maintain optimum performance and
minimize wear, clean your lighting products at least twice a month.
However, be aware that usage and environmental conditions could
be contributing factors to increase the cleaning frequency.
To clean the product, follow the instructions below:
1.Unplug the product from power.
2.Wait until the product is at room temperature.
3.Use a vacuum (or dry compressed air) and a soft brush to
remove dust collected on the external surface/vents.
4.Clean all transparent surfaces with a mild soap solution,
ammonia-free glass cleaner, or isopropyl alcohol.
5.Apply the solution directly to a soft, lint free cotton cloth or a
lens cleaning tissue.
6.Softly drag any dirt or grime to the outside of the transparent
surface.
7.Gently polish the transparent surfaces until they are free of
haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
6.TECHNICAL SPECIFICATIONS
Material: Plastics + Metal panel
Item size: 6.9 x6.9 x3.9in
Input Voltage: 110-240VAC
Power: 40-watts (included 36-watts led + 4-watts Power)
Light Source: 36x1-watt LED(12Red+12Green+12Blue)
Net Weight: 0.6Kg
-14-
To Next Page
Loading...