Make sure that the structure onto which you are mounting the
product can support the product’s weight. See the Technical
Specifications for weight information.
When mounting the product overhead, always use a safety cable.
Mount the product securely to a rigging point, whether an
elevated platform or a truss.
When rigging the product onto a truss, use a mounting clamp of
appropriate weight capacity.
The bracket adjustment knobs allow for directional adjustment
when aiming the product to the desired angle. Only loosen or
tighten the bracket knobs manually. Using tools could damage
the knobs.
-6-
Mounting Clamps
Bracket
Adjustment Knobs x 2
Double-
Bracketed Yoke
(Not included)
Mounting Diagram
To Next Page
Loading...