7
Changing the Batteries
Each YJACK® product is powered by (2) AAA batteries housed beneath the removable battery door on
the back of the device. Using your finger or a flat blade, pry up on the battery door to remove it from
the device. Remove the batteries and place (2) new AAA batteries into the battery holder. Reference the
required polarity of the batteries molded into the battery holder. Replace the battery door by inserting
the tab on the inside edge of the door into the slot in the module enclosure and then press down on the
battery door until it snaps into place.
With a P51-870 TITAN® and TITANMAX™ Digital Manifold
To use the YJACK® series of Bluetooth® Sensing devices with the P51-870 TITAN® and TITANMAX™
Digital Manifolds, ensure that the firmware version is up to date. The YJACK® Temperature Clamp/Strap,
and YJACK DEW® are used in the P51-870 TITAN® and TITANMAX™ sessions. YJACK® VAC and YJACK
AMP®, YJACK PRESS® and YJACK MANO® readings are only broadcast to the YJACK VIEW® app and
cannot be displayed on the P51-870 TITAN® or TITANMAX™. If a firmware update is required, reference
the “P51-870 TITAN® and TITANMAX™ Digital Manifold – Firmware Update” for details on updating the
firmware.
With the YJACK VIEW® Smart Application
The YJACK VIEW® smart application provides a simple yet comprehensive interface to
display, analyze, and record the data from the P51-870 TITAN®, TITANMAX™ and all YJACK® Bluetooth®
devices. The app is available for both iOS and Android smart devices through the App Store and Google
Play Store, respectively. Be sure to download any available app updates as they will include new
features and app enhancements. Open the camera app on your Android or iOS smart device and scan
over the QR codes or click on the links below to go directly to the app store pages:
Google Play Store for Android™ devices App Store for iOS devices
https://play.google.com/store/apps/det
ails?id=com.ritchieengineering.yjackview
https://apps.apple.com/us/app
/yjack-view/id1492358956
To Next Page
Loading...
