Yellowtec iXm - Pre-Roll and Voice Activated Recording

16
www.yellowtec.com I info@yellowtec.com
Recording
Pre Roll Recording lets your iXm capture up to 30 seconds of your inter-
view before you hit the REC Key. This mode avoids missing unexpected
statements.
NOTE: Use the iXm Admin software in order to enable this
record mode. The setting allows you to determine the pre-
roll time. It can be setup for pre recordings times of up to 30
seconds. (See section `User Software´).
How do I work with Pre-Roll Recording?
Yes, VAR (Voice Activated Recording) can be used to start your recor-
ding automatically at an adjustable threshold. The recording will halt
when the sound pressure level will drop under a second adjustable
threshold level. This mode is very useful when you need to remote
control your iXm. All parameters for VAR will be selected in the Admin
Software (See section `Admin Software´).
It can be combined with the Pre-Roll Recording to achieve maximum
safety to catch an interview.
Can I start my recording automatically?
Simply hit REC (1) on the Record Keypad during a recording (see: How
to record?). Each hit adds a new marker to the current recording.
When browsing through the files in Playback Mode (see: How do I
playback recordings) the recording will always start at the latest marker
position.
NOTE: Markers will only be saved when iXm‘s recording files
are set to *.wav or *.bwf format.
How do I set markers?