EasyManua.ls Logo

Yellowtec iXm - Safety Instructions; Using iXm Without Mic Head; Attaching Mic Head Correctly; Initial Battery Charging Procedure

Yellowtec iXm
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
www.yellowtec.com I info@yellowtec.com
Safety instructions
Reading the instructions is essential to prevent the prdocut from any
damage. It helps to avoid false operation and secures successful and
long lasting use of your product.
Never use the iXm without having a Mic Head installed. It helps
to prevent damage to the mounting thread and the electronic
contacts.
When twisting the Mic Head onto the Recorder hold the head
straight and do not use excessive force. Twist the Mic Head
gently tight. The ne thread will prevent the Mic Head going
loose.
Before you start to use the iXm charge the internal Li-Ion
battery for a minimum of 4 hrs. The Battery Indicator will stop
ashing when the Li-Ion Battery is fully charged.
Important!
When using batteries make sure you use quality AA batteries
of the same make. Make sure you discard used batteries in
compliance with environmental regulations.
Never leave batteries inside the iXm‘s battery compartment for
a long period of time. Used batteries may leak and terminate
warranty claims.
When using the wall charger make sure the international mains
adapter heads are always installed to the charger. Never use the
chargers adapter heads separate from the charger!

Other manuals for Yellowtec iXm