Need help?Do you have a question about the Yeswelder CUT-55DS PRO and is the answer not in the manual?
General| Max Cutting Thickness | 20mm |
|---|---|
| Severance Thickness | 25mm |
| Clean Cut Thickness | 15mm |
| Protection Class | IP21S |
| Insulation Class | H |
| Pilot Arc | Yes |
| Air Pressure | 0.4-0.6 Mpa |
| Input Voltage | 110V/220V |
| Output Current | 55A |
| Duty Cycle | 60% @ 55A |
Covers fume control, PPE, and situational precautions.
Addresses Proposition 65 warnings and specific health risks.
Details dangers of electric shock, arc rays, and EMF.
Covers fume hazards, fire prevention from sparks, and gas cylinder safety.
Focuses on safety for electrically powered equipment.
Introduces the CUT-55DS PRO plasma cutter.
Lists items included in the package.
Details the machine's technical specifications.
Shows physical dimensions and weight of the unit.
Details the dimensions and weight of the cutting torch.
Critical safety measures before and during installation.
Covers choosing a location and connecting compressed air.
Guidance on maintaining the air filter and regulator.
Details output (torch/work lead) and input power connections.
Recaps safety rules for operating the plasma cutter.
Identifies and explains the main controls and indicators.
Details specific display elements, LEDs, and mode settings (2T/4T).
Shows examples of display readings and input voltage status.
Explains how to set gas pressure and convert units.
Guides on adjusting output current and post-flow time.
Explains error codes and thermometer warnings.
Covers setting parameters, checking indicators, and readiness for cutting.
Provides tips for optimal cutting performance.
Addresses cutting issues, parameter tables, and consumable replacement.
Emphasizes electrical safety and precautions during maintenance.
Outlines regular cleaning and checks for the machine.
Guides on maintaining and replacing torch parts.
Lists common issues and their potential solutions.
Explains specific error codes displayed by the machine.
To Next Page
