Need help?Do you have a question about the Yeswelder ARC-205DS PRO and is the answer not in the manual?
General| Output Current Range | 20-205A |
|---|---|
| Hot Start | Yes |
| Arc Force | Yes |
| Anti-Stick | Yes |
| Protection Grade | IP21S |
| Insulation Grade/Class | F |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Input Voltage | 110V/220V |
| Welding Process | MMA (Stick) |
| Duty Cycle | 60% at 205A, 100% at 158A |
General warnings about cancer, birth defects, and reproductive harm from engine exhaust.
Safety precautions for operating and maintaining engine-powered equipment.
Information on potential hazards of EMF from welding and precautions.
Critical warnings and precautions to prevent electric shock during welding.
Warnings about arc rays and necessary protective measures.
Dangers of welding fumes and gases and ventilation requirements.
Risks of fire and explosion from welding sparks and hot materials.
Precautions for handling and using compressed gas cylinders.
Safety guidelines for installing and grounding electrically powered equipment.
Details on input voltage, frequency, output ratings, dimensions, and temperature.
Essential safety guidelines for installation and operation.
Guidelines for selecting location, stacking, and tilting the machine.
Instructions for making secure input and ground connections.
Connecting power, output cables, and preparing for Stick/TIG welding.
Crucial safety warnings before operating the welding machine.
Overview of the welding machine, its capabilities, and limitations.
Identification and explanation of the machine's controls and displays.
Instructions on how to prepare the workpiece before welding.
Guide for setting up and performing stick welding operations.
How to adjust the arc force level for arc stability and welding depth.
How to adjust the hot start level for easier arc initiation.
Steps for performing Lift TIG welding with the machine.
Identification of the accessories provided with the welding machine.
Essential safety guidelines to follow during maintenance procedures.
Steps for safely discharging input filter capacitors.
Recommended regular maintenance for the welding machine.
Instructions on how to effectively use the troubleshooting section.
Common problems and solutions for stick welding issues.
Common problems and solutions for TIG welding issues.
Troubleshooting steps for electrical issues and power failures.
Explanation of the provided electrical wiring diagram.
To Next Page
