YOKOGAWA ADMAG TI Series Read Me First

2
All Rights Reserved, Copyright © 2017. Yokogawa Electric Corporation
IM 01E21A21-01Z1
The following symbols are used in the Instrument
and the manual to indicate the accompanying safety
precautions:
Protective grounding terminal
Functional grounding terminal (This terminal should
not be used as a protective grounding terminal.)
Alternating current
Direct current
Caution
This symbol indicates that the operator must refer to
an explanation in the user’s manual in order to avoid
the risk of injury or death of personnel or damage to
the instrument.
• For the protection and safe use of the instrument and
the system in which this instrument is incorporated,
be sure to follow the instructions and precautions
on safety that is stated in this manual whenever
you handle the instrument. Take special note that if
you handle the instrument in a manner that violated
these instructions, the protection functionality of the
instrument may be damaged or impaired. In such
cases, YOKOGAWA does not guarantee the quality,
performance, function, and safety of instrument.
• When installing protection and/or safety as lightning
protection devices and equipment for the instrument
and control system or designing or installing separate
protection and/or safety circuits for fool-proof design
and fail-safe design of the processes and lines that
use the instrument and the control system, the user
should implement these using additional devices and
equipment.
• ShouldusethepartsspeciedbyYOKOGAWAwhen
replacing.ContactYOKOGAWA’sserviceofcefor
fuse replacement.
• This instrument is not designed or manufactured
to be used in critical applications that directly affect
or threaten human lives. Such applications include
nuclear power equipment, devices using radioactivity,
railway facilities, aviation equipment, air navigation
facilities, aviation facilities, and medical equipment. If
so used, it is the user’s responsibility to include in the
system additional equipment and devices that ensure
personnel safety.
• Do not modify this instrument.
• The instrument should be disposed of in accordance
with local and national legislation/regulations.
WARNING
• Purpose of use
This instrument is the Magnetic Flowmeter for
useofmeasuringtheliquidow.Donotusethis
instrument for other purposes.
• Power supply
Ensure that the source voltage matches the voltage
of the power supply before turning on the power.
Power Supply Code 1:
• AC Type:
Rated Power Supply: 100 to 240 V AC, 50/60 Hz
• DC Type:
Rated Power Supply: 100 to 120 V DC
Power Supply Code 2:
• AC Type:
Rated Power Supply: 24 V AC, 50/60 Hz
• DC Type:
Rated Power Supply: 24 V DC
Power Consumption: 13 W
WARNING
• Connect the Protective Grounding Terminal
Ensure to connect the protective grounding to
prevent electric shock before turning on the power.
• Do Not Impair the Protective Grounding
Never cut off the internal or external protective
grounding wire or disconnect the wiring of the
protective grounding terminal. Doing so invalidates
the protective functions of the instrument and poses
a potential shock hazard.
• Do Not Operate with Defective Protective
Grounding
Do not operate the instrument if the protective
grounding might be defective. Also, ensure to check
them before operation.
• Do Not Operate in an Explosive Atmosphere
Do not operate the instrument in the presence
ofammablegas,vapors,orcombustibledust.
Operation in such an environment constitutes a
safety hazard. Prolonged use in a highly dense
corrosive gas (H
2
S, SO
X
, etc.) will cause a
malfunction.
• Do Not Remove the transmitter case
The case should be removed by YOKOGAWA’s
qualiedpersonnelonly.Openingthecaseis
dangerous, because some areas inside the
instrument have high voltages.
• Ground the Instrument before Making External
Connections
Connect the protective grounding before connecting
to the item under measurement or control unit.
• Damage to the Protection
Operating the instrument in a manner neither
described in this manual nor the following (see
last page) manuals may damage the instrument’s
protection.
• Installation, Wiring, and Maintenance
• Themagneticowmeterisaheavyinstrument.
Be careful that no damage is caused personnel
through accidentally dropping it, or by exerting
excessiveforceonthemagneticowmeter.When
movingthemagneticowmeter,alwaysusea
trolley and have at least two people carry it.
• Whenthemagneticowmeterisprocessing
hotuids,theinstrumentitselfmaybecome
extremelyhot.Takesufcientcarenottoget
burnt.
• Wheretheuidbeingprocessedisatoxic
substance,avoidcontactwiththeuidand
avoid inhaling any residual gas, even after the
instrument has been taken off the piping line for
maintenance and so forth.
• Do not apply excessive weight, for example, a
personsteppingonthemagneticowmeter.
• Installation, wiring and maintenance of the
magneticowmetermustbeperformedbyexpert
engineer or skilled personnel. No operator shall
be permitted to perform procedures relating to
installation, wiring and maintenance.
• Themagneticowmetermustbeinstalledwithin
thespecicationconditions.

YOKOGAWA ADMAG TI Series Specifications

General

Brand	YOKOGAWA
Model	ADMAG TI Series
Category	Measuring Instruments
Language	English