YOKOGAWA AQ6370D Getting Started Guide

iii
IM AQ6370D-02EN
Checking the Contents of the Package
After opening the package, check the following items before beginning use. If any of
the contents are incorrect, missing, or appear to be abnormal, please contact your
YOKOGAWA dealer or representative.
AQ6370D Main Unit
Check that the model and suffix on the name plate on the rear of the instrument
match those of your order. When contacting the dealer from which you purchased the
instrument, please give them the instrument number.
MODEL Suffix Description
AQ6370D Optical Spectrum Analyzer AQ6370D
Specification -02 Limited model (successor of -01)
-12 Standard model (successor of -10)
-22 High performance model (successor of -20)
-01 Limited model
-10 Standard model
-20 High performance model
Bult-in light -L0 Without Light source
source -L1 Wavelength reference source
Power cord
1
-D UL/CSA standard power cord (part no.: A1006WD),
maximum rated voltage: 125 V
-F VDE standard power cord (part no.: A1009WD),
maximum rated voltage: 250 V
-R AS standard power cord (part no.: A1024WD),
maximum rated voltage: 250 V
-Q BS standard power cord (part no.: A1054WD),
maximum rated voltage: 250 V
-H GB standard power cord (part no.: A1064WD),
maximum rated voltage: 250 V
-N NBR standard power cord (part no.: A1088WD),
maximum rated voltage: 250 V
Options /FC AQ9447 (FC) connector adapter (for optical input)
2
/SC AQ9447 (SC) connector adapter (for optical input)
2
/RFC AQ9441 (FC) universal adapter (for calibration light source
output)
3
/RSC AQ9441 (SC) universal adapter (for calibration light source
output)
3
1 Make sure that the attached power cord meets the designated standards of the country and
area that you are using it in.
2 Already attached to the optical input of the AQ6370D front panel.
3 Already attached to the calibration light source output of the AQ6370D front panel.
For products whose suffix code contains “Z,” an exclusive manual may be included.
Please read it along with the standard manual.
• No. (Instrument Number)
Please contact your nearest Yokogawa representative.
AQ6370D-02, -12, -22
AQ6370D-01, -10, -20
Made in Japan
Yokogawa Test & Measurement Corporation
XXX - XXXX

YOKOGAWA AQ6370D Specifications

General

Brand	YOKOGAWA
Model	AQ6370D
Category	Measuring Instruments
Language	English