YOKOGAWA Daqstation DX2000 User Manual

Switching Operation Screens
4-17
IM 04L42B01-01E
1
2
3
4
5
6
7
8
9
10
11
12
13
App
Index
4.
Select Display or Event, and press DISP/ENTER.
A search time input window appears.
5.
Enter the time you want to search for, and press DISP/ENTER.
If there is data for the time that you specify, the data appears in the historical trend display.
Display Example
 DisplayConditions
• Thecursorislocatedatthetimethat you specify for the search.
• Allotherdisplayconditionsarethesameasthoseofthedisplaybeforethesearch.
• Ifthereisnodataatthedateandtimethatyouspecify,datafromalatertimeinthe
same day is displayed. If there is no such data, an error message appears.
• Ifthedisplaygroupthatwasbeingdisplayedbeforethesearchdoesnotexistinthe
data that you have specified, the display group in the data with the lowest number
is displayed.
4.3DisplayingPastMeasuredData(HistoricalTrendDisplay)

YOKOGAWA Daqstation DX2000 Specifications

General

Brand	YOKOGAWA
Model	Daqstation DX2000
Category	Recording Equipment
Language	English