YOKOGAWA Daqstation DX2000

7-6
IM 04L42B01-01E
Explanation
• ResettingtheRelativeTimer
Restarts the timer.
• Theresettingofthetimerisconsideredtobeatimeout.(Ifthetimerisusedasan
event, the action is executed.)
• IfthetimerisusedinTLOGcomputationonthe/M1or/PM1mathoptionand
TLOG computed value reset at each interval is specified, the computed result is
reset.
• ResettingtheMatchTimeTimer(Releasenumber3orlater)
This operation resets an expired match time timer so that it can operate again.
• Theresettingofamatchtimetimerdoesnotcountasatimerexpiration(anditwill
not count as an event action event).
• Thisoperationcanbeusedwithmatchtimetimerswhosetimeractionissetto
single.
• IfthetimerisusedinTLOGcomputationonthe/M1or/PM1mathoptionand
TLOG computed value reset at each interval is specified, the computed result is
reset.
7.1SettingtheEventActionFunction
(Includingtheremotecontrolfunctionofthe/R1and/PM1optionsandtheUSERkey)