YOKOGAWA EXAxt 450 User Manual

Electrostatic discharge
The EXAxt converter contains devices that
can be damaged by electrostatic discharge.
When servicing this equipment, please observe
proper procedures to prevent such damage.
Replacement components should be shipped in
conductive packaging. Repair work should be
done at grounded workstations using grounded
soldering irons and wrist straps to avoid elec-
trostatic discharge.
WARNING
Installation and wiring
The EXAxt converter should only be used with
equipment that meets the relevant IEC, Ameri-
can or Canadian standards. Yokogawa accepts
no responsibility for the misuse of this unit.
CAUTION
The Instrument is packed carefully with shock
absorbing materials, nevertheless, the instru-
ment may be damaged or broken if subjected
to strong shock, such as if the instrument is
dropped. Handle with care.
WARNING
• Donotuseanabrasiveororganicsolventin
cleaning the instrument.
• DonotmodifytheISC450Gconverter.
• Substitutionofcomponentsmayimpair
suitability for Division 2.
Do not remove or replace while circuit is live
unless area is know to be non-hazardous.
Explosion Hazard – Do not disconnect
equipment unless area is known to be non-
hazardous.
Do not reset circuit breaker unless power
has been removed from the equipment or
the area is known to be non-hazardous.
Notice
• This manual should be passed on to the end
user.
• The contents of this manual are subject to
change without prior notice.
• The contents of this manual shall not be
reproduced or copied, in part or in whole,
without permission.
• This manual explains the functions
contained in this product, but does not
warrant that they are suitable the particular
purpose of the user.
• Every effort has been made to ensure
accuracy in the preparation of this manual.
However, when you realize mistaken
expressions or omissions, please contact the
nearest Yokogawa Electric representative or
sales office.
• Thismanualdoesnotcoverthespecial
specifications. This manual may be left
unchanged on any change of specification,
construction or parts when the change does
not affect the functions or performance of
the product.
• Iftheproductisnotusedinamanner
specified in this manual, the safety of this
product may be impaired.
Yokogawa is not responsible for damage to the
instrument, poor performance of the instrument
or losses resulting from such, if the problems
are caused by:
• Improperoperationbytheuser.
• Useoftheinstrumentinimproper
applications
• Useoftheinstrumentinanimproper
environment or improper utility program
• Repairormodificationoftherelated
instrument by an engineer not authorized by
Yokogawa.
Safety and Modification Precautions
• Followthesafetyprecautionsinthismanual
when using the product to ensure protection
and safety of the human body, the product
and the system containing the product.
How to dispose the batteries:
ThisisanexplanationaboutthenewEUBat-
tery Directive (DIRECTIVE 2006/66/EC). This
directiveisonlyvalidintheEU.Batteriesare
includedinthisproduct.Batteriesincorporated
into this product cannot be removed by your-
self. Dispose them together with this product.
WhenyoudisposethisproductintheEU,
contactyourlocalYokogawaEuropeB.V.office.
Do not dispose them as domestic household
waste.
Batterytype:silveroxidebattery
Notice:
The symbol (see above) means they shall be
sorted out and collected as ordained in ANNEX
II in DIRECTIVE 2006/66/EC.
PREFACE

YOKOGAWA EXAxt 450 Specifications

General

Brand	YOKOGAWA
Model	EXAxt 450
Category	Media Converter
Language	English