28
IM 04L21B01-02EN
Writing the Message “START”
Registering the Word “START” in Message Number 1
1.
Press MENU (to switch to setting mode) > select the Menu tab > Message >
DISP/ENTER
.
2.
Press the 1-10 soft key.
The message, “Message numbers 1-10 can also be used for free message” appears. Press
DISP/ENTER.
3.
Press the down arrow key. With message 1 selected, press the Input soft key.
Enter “START”.
Show the message registration window.
For the input procedure, see “Entering Values and Characters” on page 15.
4.
Press DISP/ENTER.
5.
Press ESC three times or MENU twice to return to the operation mode screen.
Operation complete.
Setting the Functions and Operations
To Next Page
Loading...
