YOKOGAWA GM10 - User Manual

Data Acquisition System GM
First Step Guide
IM 04L55B01-02EN
4th Edition
Contents
Introduction ................................................................................. 2
Checking the Package Contents ................................................. 3
MODEL and SUFFIX Codes ....................................................... 4
Standard Accessories ................................................................. 5
Module Notation .......................................................................... 6
GM Overview ............................................................................. 6
GM Conguration ........................................................................ 6
Module Version and Notes on Linking .......................................... 6
Channel Names .......................................................................... 7
Operating Procedure ........................................................8
Basic Operation .............................................................. 10
Names of the GM10 Parts ..........................................................10
Conguring the GM via Ethernet Communication .......................10
Conguring the GM via USB Communication .............................12
Starting to Measure and Record .................................................12
Installation.......................................................................13
Installation Location ....................................................................13
Installation Procedure .................................................................13
Unit External Dimensions (Unit: mm) ...........................................13
Installing on a Desktop or Floor.................................................. 14
Mounting on a DIN Rail .............................................................. 14
Mounting on a Wall .................................................................... 14
Wiring .............................................................................. 15
Precautions to Be Taken While Wiring ........................................16
Removing and Attaching a Terminal Cover .................................16
Removing and Attaching a Terminal Block ..................................16
Wiring Procedure .......................................................................17
Internal dimensions of the M3 screw terminal (unit: mm) .............17
Wiring the Clamp Terminal ..........................................................17
Wiring to a GX90XA Analog Input Module ..................................17
Wiring to a GX90XD Digital Input Module....................................19
Wiring to a GX90YD Digital Output Module .................................19
Wiring to a GX90WD Digital I/O Module .................................... 20
Wiring to a GX90XP Pulse Input Module.................................... 20
Wiring to a GX90YA Analog Output Module ............................... 20
Wiring to a GX90UT PID Control Module ................................... 20
Connecting to the RS-422/485 Connector
(/C3 option) ............................................................................21
Connecting to the USB Port .......................................................21
Connecting to the Ethernet Port .................................................21
Wiring the Power Supply ........................................................... 22
Turning the Power On and Off ................................................... 23
Connecting GX90EX Expansion Modules ................................. 23
Bluetooth Connection Procedure (/C8 option) ............................ 24
User’s
Manual

YOKOGAWA GM10 Specifications

General

Brand	YOKOGAWA
Model	GM10
Category	Other
Language	English

Summary

GM System Configuration and Versions

GM Configuration Options

Covers single and multi-unit system configurations for the GM.

Module Version and Linking Notes

Lists compatible module firmware and notes on linking modules and units.

Channel Management and Mode Limitations

Channel Naming and Operations

Explains channel naming conventions and how operations are performed on channels.

Measurement Mode Impact on Limitations

Details how measurement modes affect channel limits, module support, and recording.

Operating Procedure Steps

Module Preparation and System Setup

Guides on checking modules, installing the base, linking, and configuring the GM system.

Initial System Configuration

Covers setting the GM IP address, measurement mode, date, and time.

Basic Operation and GM10 Details

GM10 Parts Identification

Identifies key physical parts of the GM10, including LEDs, keys, and ports.

SD Card Installation

Instructions for inserting an SD card into the GM10 for data storage.

Configuring Measurement and Display Settings

Setting Measurement and Recording Conditions

How to set recording intervals, data length, and recording modes.

Setting Display Groups

How to assign channels to display groups for measurement data.

GM Configuration via USB and Measurement Start

USB Communication Configuration

Steps for connecting and configuring the GM via USB using Hardware Configurator.

Starting Measurement and Recording

Procedures to start and stop data recording and measurement.

Installation Guidelines

Mounting Methods

Desktop or Floor Mounting

Instructions for placing the system upright on a desktop or floor.

DIN Rail Mounting

Steps for securely mounting the unit onto a DIN rail.

Wall Mounting

Details for wall mounting the system, including dimensions and screws.

General Wiring Precautions

Wiring to GX90 XA Analog Input Module

Wiring Examples for Various Modules

GX90 WD Digital I;O Module Wiring

Terminal diagrams and wiring for the GX90WD module.

GX90 YA Analog Output Module Wiring

Terminal diagrams and wiring for the GX90YA analog output module.

GX90 XP Pulse Input Module Wiring

Terminal diagrams and wiring for the GX90XP pulse input module.

Communication Connections

RS-422;485 Connector Connection

How to connect to the RS-422/485 port using four-wire or two-wire systems.

USB Port Connection

Details the USB port for configuration and data transfer.

Ethernet Port Connection Status

How to check Ethernet link and communication status using indicators.

Power Supply Wiring

Power Management and Expansion Modules

Turning Power On and Off

Warnings and cautions for safe power cycling of the GM system.

Connecting GX90 EX Expansion Modules

Explains how to connect GX90EX modules to form a multi-unit system via Ethernet.

Expansion Module Setup and Bluetooth Connectivity

GX90 EX Expansion Module Settings

How to set unit number, data rate, and mode using GX90EX dipswitches.

Bluetooth Connection Procedure

Steps for initial pairing and connecting the GM10 via Bluetooth.