EasyManuals Logo

YOKOGAWA PH202S User Manual

YOKOGAWA PH202S
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
IM 12B0702-01E
11-4 Appendix
(14)
(15)
(13)
(12)
(11)
(14)
16
15
13
12
11
14
Core cable number
of pH sensor
HA406
DPA406
11
12
13
14
15
16
11
12
13
14
15
16
PH202G, S
pH/ORP transmitter
FU20
In connection of the PH202G
,
S and a special purpose pH
sensor having temperature element
PH202G, S
pH/ORP transmitter
Terminal number of
pH/ORP transmitter
NOTE :
* Two core cable numbered by 14 are connected
to the No. 14 terminal of the PH202G, S.
* Nothing is connected to the 16 terminal
of the PH202G, S.
In connection of the PH202G
,
S and FU20 pH/ORP sensor
F3.6.2E.eps
Figure 11-2 Optional Sensor wiring
GE
RE
T1
T2
SE
S
15 (Red)
13 (Brown)
11 (Black)
12 (White)
14 (Green)
16 (Yellow)
15 (Red)
13 (Brown
)
14 (Black)
16 (Green
)
GE
RE
SE
G
pH sensor
ORP sensor
NOTE:
When PH202.../TB option specified for using
the sensor with folk terminal
—for PH200/PH400, OR200/OR400 type—.
Use the cable gland within the transmitter.
For wiring, refer to right figure .
Cables, terminals and glands
For the PH202G, PH202SJ use cable of outside diameter 6 to 12 mm. When using individual
electrodes -- glass electrode, reference electrode -- and separate temperature sensor, rather than
an all-in-one sensor, use the circular packing with four holes. Plug the unused hole in the packing
with the black plug. When using this packing, you have to be careful to ensure that it is well enough
sealed to be waterproof.
Requirement of connecting with external instruments
Terminal for pin cable terminal
Pin-shaped crimp contact
with sleeve insulator
max. 2.5 mm
0.5 N m or less
Weidmuller Co., Ltd. made:
H0.34/10, H0.5/12, H1/12, H1.5/12S
Screw terminal (option /TB)
Ring-shaped or fork-shaped
crimp contact
Crimp contact shown as the figures
under this table, which meets M3 screw
1.35 N m (recommended)
JST, Mfg. Co., Ltd. made:
VD1.25-3 (Ring shape),
VD1.25-S3A (Fork shape)
Crimp contact
for cable
Usable contact
Torque for fixing
Example of
crimp contact
*
*
Note: Other crimp contact may be required , depending on core-cable diameter .
T3.2E.eps
8.3mm or less
8.3mm or less
F3.7.EPS
2.5mm or less
Pin-shaped terminal
Ring-shaped terminal
Fork-shaped terminal

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the YOKOGAWA PH202S and is the answer not in the manual?

YOKOGAWA PH202S Specifications

General IconGeneral
BrandYOKOGAWA
ModelPH202S
CategoryTransmitter
LanguageEnglish

Related product manuals