Yongnuo RF605C User Manual

FUse the non specialized transmitter can also wireless trigger the flash (single
contact trigger).
7
Wireless triggering and testing
5.Waken the flash: half press the transmitter(TX status) multifunction button or
camera shutter to waken the flash.
6.Test and trigger the flash :Fully press the multifunction button of the transmitter
(TX status) to test the flash once. When fully pressing the release button of camera
shutter, it will wireless synchronously trigger the on-top flash and off-camera flash.
YN560-TX
RF605
Example: use the YN560-TX and set C group not flash
Set the C group flash mode to “--” when using the YN560-TX ,the C group of
corresponding RF605 receiver does not flash.

Yongnuo RF605C Specifications

General

Brand	Yongnuo
Model	RF605C
Category	Camera Accessories
Language	English