What to do if there is no pulse signal on York Fitness Elliptical Trainer?
If your York Fitness Elliptical Trainer is not showing a pulse signal, first verify all wires are connected properly. Ensure you are not moving your hands too much and that your palms are dry. Grip the sensors with moderate pressure. Remove any rings you are wearing.
Why is there no speed display on my York Fitness Elliptical Trainer?
If your York Fitness Elliptical Trainer isn't displaying speed, verify all wires are connected properly. If the speed sensor is too far from the magnet, contact your local YORK distributor.
General| Resistance Type | Magnetic |
|---|---|
| Resistance Levels | 16 |
| Display | LCD |
| Maximum User Weight | 120 kg |
| Flywheel Weight | 7 kg |
| Drive System | Belt |
| Transport Wheels | Yes |
| Weight | 32 kg |
| Type | Upright |
| Display Metrics | Time, Speed, Distance, Calories, Pulse |
| Seat Adjustment | Vertical |
| Pedals | Self-balancing with adjustable straps |
Equipment meets EU's EMC and Low Voltage directives, EN957 1 & 6 - CLASS HC.
Contact details for York Barbell UK Ltd. for customer support.
Contact details for York Fitness Australia for customer support.
Attaching front upright posts to the main frame using bolts and washers.
Attaching the handlebar console to the upright posts, ensuring wires are not trapped.
Securing the console housing to the upright posts with bolts.
Verifying all screws are tight and the equipment is on a level surface.
Connecting power, switching on, and attaching the safety key.
Explanation of the safety key's function and proper usage for operation and storage.
Details on how to use the various buttons and functions on the treadmill's console.
Table detailing display parameters like time, speed, incline, distance, and calories.
Description of each key on the console and its function during operation.
Instructions for starting and operating the treadmill in manual mode.
Guide to selecting and using the treadmill's manual programs for workouts.
Information on the 12 pre-set workout programs, including how to select and start them.
Instructions for using the Body Fat Mode to calculate body fat ratio by inputting user data.
How to use the built-in hand pulse sensors to monitor heart rate during workouts.
Procedures for folding the treadmill deck and safely moving it using wheels.
Guide to interpreting error codes displayed on the console and initial troubleshooting steps.
Recommendations for placing the treadmill in a suitable indoor environment.
Guidelines for cleaning the treadmill using a damp cloth, with electrical safety precautions.
Procedure for the initial 10-minute run-in period to ensure proper belt and motor function.
Detailed guide on how and when to lubricate the treadmill deck for optimal performance.
Instructions on how to adjust the treadmill belt tension to prevent slipping.
Steps to correct treadmill belt alignment if it drifts to the left or right.
Guidance on how to safely begin a workout session on the treadmill.
Tips on maintaining proper posture and form while running on the treadmill.
Illustrations and instructions for basic stretches to perform before or after workouts.
Advice on exercise duration and frequency based on fitness levels and goals.
Explanation of heart rate training zones and how to use them for different fitness goals.
Formula and steps to calculate personal target heart rate zones for effective training.
To Next Page