Wired Zone Controller DWCPXY
2
No. Symbols Description
1 Swing function
2
Air exchange function (This function is currently unavailable for
this unit.)
3 Sleep function (only Sleep 1).
4 Each kind of running mode of indoor unit (auto mode)
5 Cooling mode
6 Dry mode
7 Fan mode
8 Heating mode
9 Defrosting function for the outdoor unit.
10
Keycard control (This function is currently unavailable for this
unit.)
11 Lock function.
12 SHIELD Shield function: The button operation, temperature setting,
"On/Off" operation, "Mode" setting, and "Save" setting are
disabled.
13 Turbo Turbo function state
14 MEMORY Memory function (The indoor unit resumes the original setting state
after power failure and then power recovery.)
15 It blinks under On state of the unit without operation of any button.
16 SAVE Energy-saving function (This function is currently unavailable for
this unit).
17 Ambient/setting temperature value
18 E-
HEATER
Electric auxiliary heating function.
19 BLOW Blower function.
1.2 Introduction to the LCD Icons
Table 1.1
To Next Page
Loading...
