York DWCPXY - 2 Buttons; Layout of Buttons; Functions of Buttons

Wired Zone Controller DWCPXY
3
20
Timing value.
21
QUIET
Quiet function (Two types: quiet and auto quiet)
(This function is currently unavailable for this
unit).
2 Buttons
2.1 Layout of Buttons
2.2 Functions of Buttons
Table 2.1
No.
Name
Function
1
Enter/Cancel
Function selection and cancellation.
2
▲
①
.Running temperature setpoint of the indoor unit, range: 60
o
F to 86
o
F
(16
o
C to 30
o
C). ②.Timer setting, range:
0.5 hr. to 24 hrs.
6
▼
3
Fan
Select high/middle/low/auto fan speed.
4
Mode
Select Cooling/Heating/Fan/Dry/Auto mode of the indoor unit.
5
Function
Switching between the functions of Turbo/Save/E-heater/Blow
7
Timer
Timer setting.
8
On/Off
Turns the indoor unit on/off
4+2
▲+ Mode
(Memory)
Press and hold these buttons for five seconds while the unit is OFF to
enter/cancel the Memory function. (If memory is set for the indoor unit
after a power failure, power recovery will resume as the original setting
state. If not, the indoor unit is defaulted to be OFF after power recovery.
Memory OFF is the default factory setting.).