EasyManua.ls Logo

York R-407C Optimized - Temperatures and Flows

York R-407C Optimized
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
YORK INTERNATIONAL
11
YORK INTERNATIONAL
FORM 201.19-EG4
Temperatures and Flows
NOTES:
1. For leaving brine temperature below 40°F, contact your nearest YORK ofce for application requirements.
2. For leaving water temperature higher than 5.5°F, contact the nearest YORK ofce for application guidelines.
3. The evaporator is protected against freeze-up to -20°F with an electrical heater as standard.
ENGLISH UNITS
NOTES:
1. For leaving brine temperature below 5°C, contact your nearest YORK ofce for application requirements.
2. For leaving water temperature higher than 13°C, contact the nearest YORK ofce for application guidelines.
3. The evaporator is protected against freeze-up to -28.8°C with an electrical heater as standard.
MODEL
LEAVING WATER
COOLER FLOW
AIR ON
NUMBER
TEMPERATURE (°C) (L/S)
3
CONDENSER (°C)
YCAS
MIN.
1
MAX.
2
MIN. MAX. MIN. MAX
0098 4.4 12.8 8.9 25.4 -17.7 50
0118 4.4 12.8 8.9 25.4 -17.7 50
0128 4.4 12.8 11.3 48.5 -17.7 50
0138 4.4 12.8 8.9 25.4 -17.7 50
0148 4.4 12.8 11.3 48.5 -17.7 50
0158 4.4 12.8 11.3 48.5 -17.7 50
0178 4.4 12.8 11.3 48.5 -17.7 50
0198 4.4 12.8 11.3 48.5 -17.7 50
0208 4.4 12.8 11.3 48.5 -17.7 50
0218 4.4 12.8 20.0 67.6 -17.7 50
0248 4.4 12.8 20.0 67.6 -17.7 50
0268 4.4 12.8 20.0 67.6 -17.7 50
0288 4.4 12.8 26.0 76.0 -17.7 50
0308 4.4 12.8 26.0 76.0 -17.7 50
0328 4.4 12.8 26.0 76.0 -17.7 50
0358 4.4 12.8 34.0 101.0 -17.7 50
0398 4.4 12.8 34.0 101.0 -17.7 50
0418 4.4 12.8 34.0 101.0 -17.7 50
SI UNITS
MODEL
LEAVING WATER
COOLER FLOW
AIR ON
NUMBER
TEMPERATURE (°F) (GPM)
3
CONDENSER (°F)
YCAS
MIN.
1
MAX
.2
MIN. MAX. MIN. MAX
0098 40 55 141 403 0 125
0118 40 55 141 403 0 125
0128 40 55 180 768 0 125
0138 40 55 141 403 0 125
0148 40 55 180 768 0 125
0158 40 55 180 768 0 125
0178 40 55 180 768 0 125
0198 40 55 180 768 0 125
0208 40 55 180 768 0 125
0218 40 50 318 1072 0 125
0248 40 50 318 1072 0 125
0268 40 50 318 1072 0 125
0288 40 50 415 1205 0 125
0308 40 50 415 1205 0 125
0328 40 50 415 1205 0 125
0358 40 50 530 1601 0 125
0398 40 50 530 1601 0 125
0418 40 50 530 1601 0 125

Related product manuals