York YCAL0014 - Design Parameters; English Units; SI Units

JOHNSON CONTROLS
13
FORM 150.62-EG1 (507)
NOTES:
1. For leaving brine temperature below 40°F (4.4°C), contact your nearest YORK Ofce for application requirements.
2. For leaving water temperature higher than 55°F (12.8°C), contact the nearest YORK Ofce for application guidelines.
3. The evaporator is protected against freezing to -20°F (-28.8°C) with an electric heater as standard.
4. For operation at temperatures below 25°F (-3.9°C), the optional Low Ambient Kit will need to be installed on the system (for YCAL0014-
0080 models only).
5. For operation at temperatures above 115°F (46.1°C), the optional High Ambient Kit will need to be installed on the system.
Design Parameters
ENGLISH UNITS
YCAL
LEAVING WATER
TEMPERATURE (°F) COOLER FLOW (GPM
3
) AIR ON CONDENSER (°F)
MIN
1
MAX
2
MIN MAX MIN
4
MAX
5
0014* 40 55 25 60 0 125
0020* 40 55 25 60 0 125
0024* 40 55 30 70 0 125
0030* 40 55 35 170 0 125
0034* 40 55 35 170 0 125
0040* 40 55 60 325 0 125
0042* 40 55 60 325 0 125
0044* 40 55 60 325 0 125
0050* 40 55 60 325 0 125
0060* 40 55 60 325 0 125
0064* 40 55 100 350 0 125
0070* 40 55 100 350 0 125
0074 40 55 100 350 0 125
0080 40 55 100 400 0 125
0090 40 55 138 525 0 125
0094 40 55 138 525 0 125
0104 40 55 156 625 0 125
0114 40 55 156 625 0 125
0124 40 55 156 625 0 125
01
34 40 55 156 625 0 125
YCAL
LEAVING WATER
TEMPERATURE (°C) COOLER FLOW (l/s
3
) AIR ON CONDENSER (°C)
MIN
1
MAX
2
MIN MAX MIN
4
MAX
5
0014* 4.4 12.8 1.6 3.8 -17.7 51.7
0020* 4.4 12.8 1.6 3.8 -17.7 51.7
0024* 4.4 12.8 1.9 4.4 -17.7 51.7
0030* 4.4 12.8 2.2 10.7 -17.7 51.7
0034* 4.4 12.8 2.2 10.7 -17.7 51.7
0040* 4.4 12.8 3.8 20.5 -17.7 51.7
0042* 4.4 12.8 3.8 20.5 -17.7 51.7
0044* 4.4 12.8 3.8 20.5 -17.7 51.7
0050* 4.4 12.8 3.8 20.5 -17.7 51.7
0060* 4.4 12.8 3.8 20.5 -17.7 51.7
0064* 4.4 12.8 6.3 22.1 -17.7 51.7
0070* 4.4 12.8 6.3 22.1 -17.7 51.7
0074 4.4 12.8 6.3 22.1 -17.7 51.7
0080 4.4 12.8 6.3 25.2 -17.7 51.7
0090 4.4 12.8 8.7 33.1 -17.7 51.7
0094 4.4 12.8 8.7 33.1 -17.7 51.7
0104 4.4 12.8 9.8 39.4 -17.7 51.7
0114 4.4 12.8 9.8 39.4 -17.7 51.7
0124 4.4 12.8 9.8 39.4 -17.7 51.7
0134 4.4 12.8 9.8 39.4 -17.7 51.7
SI UNITS
* Available in HFC-407c only.
* Available in HFC-407c only.