York YD600 Series - Typical Liquid Line Solenoid Wiring

5012886-YIM-B-0517
Johnson Controls Unitary Products 13
Figure 5: Typical Liquid Line Solenoid Wiring
Standard Terminal Block on ND360/480 and
ND600 with M1CZ600A models. On non ND
models isolation relays must be installed to avoid
overloading on 75 VA transformer on condensing
unit.
Non ND units may not include any or all of the
components required to wire the unit. Use the
diagram as general reference only.
Primary side of transformer
connect to line side of power
supply.
Primary side of transformer
connect to line side of power
supply.