571209-YTG-B-1211
6 Johnson Controls Unitary Products
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
YHJD42S41S4
AHX42 21 – 1395 40.5 32.4 14.00 12.00
AHX48 24 – 1445 42.0 33.0 14.50 12.00
AV*48 24 – 1385 42.0 32.6 14.50 12.00
AV*60 24 – 1360 42.0 32.6 14.50 12.00
F4FP045 24 – 1400 41.0 31.8 13.00 11.00
F5FP060 24 – 1485 42.0 33.2 14.00 12.00
F6FP048 24 – 1380 42.0 32.4 14.50 12.00
F4FV060 24 – 1350 40.5 32.2 14.00 12.00
MV16C 21 FC/MC48C 1400 40.0 32.0 13.50 11.50
MV20D 24 FC/MC48D 1440 40.5 32.8 14.00 12.00
MV16C 21 FC60C 1400 41.5 32.4 14.00 12.00
MV20D 24 FC/MC60D 1400 42.0 32.4 14.00 12.00
MX16C 21 FC/MC48C 1390 41.0 31.4 14.50 12.00
MX20D 24 FC/MC48D 1415 41.0 31.4 14.00 12.00
MX16C 21 FC60C 1420 41.5 32.2 14.50 12.00
MX20D 24 FC/MC60D 1470 41.5 32.2 14.50 12.00
YHJD48S41S4
AHE48D 24 – 1635 44.0 33.2 14.00 12.00
AHE60D 24 – 1565 45.0 35.4 14.5 12.00
AHP48 24 – 1685 45.0 34.6 13.00 11.00
AHP60 24 – 1600 44.5 34.0 14.50 12.00
AHR48D 24 – 1610 43.5 32.8 13.00 11.00
AHR60D 24 – 1620 44.5 34.0 13.00 11.00
AHX48 24 – 1660 45.5 35.0 14.50 12.00
AHX60 24 – 1570 45.5 34.4 14.50 12.00
AV*48 24 – 1625 45.0 34.4 14.50 12.00
AV*60 24 – 1560 45.0 34.6 14.50 12.00
F5FP060 24 – 1665 44.5 34.2 14.50 12.00
F6FP048 24 – 1625 45.0 34.4 14.50 12.00
F6FP060 24 – 1570 45.5 34.4 14.50 12.00
F4FV060 24 – 1665 44.5 34.2 14.50 12.00
MV16C 21 FC60C 1600 44.0 33.4 14.00 11.50
MV20D 24 FC/MC60D 1600 44.5 33.8 14.50 12.00
MV20D 24 FC/MC62D 1630 45.5 34.4 14.50 12.00
MX16C 21 FC60C 1630 45.5 34.6 14.50 12.00
MX20D 24 FC/MC60D 1585 45.5 34.6 14.50 12.00
MX20D 24 FC/MC62D 1605 45.0 34.4 14.50 12.00
YHJD60S41S4
AHE60D 24 – 1835 55.0 40.0 14.00 11.85
AHX60 24 – 1830 55.0 40.5 14.00 11.50
F6FP060 24 – 1875 56.0 41.5 14.00 12.00
MV20D 24 FC/MC62D 1855 55.5 40.5 13.75 11.50
MV20D 24 FC64D 1855 56.0 41.5 14.00 12.00
MX20D 24 FC/MC62D 1795 55.0 40.0 14.00 12.00
MX20D 24 FC64D 1795 56.0 41.5 14.50 12.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and AHRI Standards 210/240.
Cooling MBH based on 8°F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power
input in watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER
COIL
MODEL
1
COOLING
MODEL WIDTH
RATED
CFM
NET MBH
SEER EER
TOTAL SENS.
13 SEER AC WITH AIR HANDLERS
To Next Page
Loading...
