Parameters relating to fans
Parameters relating to fans
Parameters Description Level VS Unit Max. Min. Value
F01
Fan outlet:
0= Absent (function not available)
1= Present
F 10 (R/W) 1 0 1
F02
Operating mode:
0= Always ON
1= In parallel with the compressor (function
not available)
2= ON/OFF operation (function not availa‐
ble)
3= In parallel with the compressor and
speed regulation
U 48 (R/W) 3 0 1
F03 Minimum Triac voltage F 49 (R/W) step F04 0 0
F04 Maximum Triac voltage F 50 (R/W) step 100 F03 100
F11 Fan start-up time F 51 (R/W) Seconds 120 0 0
F12 Triac impulse duration F 52 (R/W) Seconds 10 0 0
F13
Fan management in defrost mode
0= Fan disabled
1= Fan enabled in cool cycle mode (func‐
tion not available)
2= Fan disabled until defrost end tempera‐
ture is reached and with start-up at maxi‐
mum speed during d16
F 53 (R/W) 2 0 0
1 User manual
1.5 Operating instructions
34
To Next Page
Loading...
