JOHNSON CONTROLS
144
SECTION 8 - MICROPANEL
FORM 201.28-NM1.1
ISSUE DATE: 1/31/2018
Sound Limit Setpoint
PROGRAM
SOUND LIMIT SETPOINT = XXX %
This indicates the sound limit setpoint programmed at
the time of the fault, if the sound limit option is activat-
ed at the factory. If the option is not factory activated,
the display will not appear.
Eductor Differential Temperature
PROGRAM â—„DEF XXXXX LO XXXXX HI XXXXX
EDUCTOR DIFFERENTIAL = XXX °F
This message indicates the programmed eductor dif-
ferential temperature at the time of the fault.
Eductor Safety Time
PROGRAM â—„DEF XXXXX LO XXXXX HI XXXXX
EDUCTOR SAFETY TIME = XXX MIN
This message indicates the eductor safety time pro-
grammed at the time of the fault.
Motor Temperature Unload
PROGRAM â—„DEF XXXXX LO XXXXX HI XXXXX
MOTOR TEMPERATURE UNLOAD = XXX °F
This message indicates the motor temperature pro-
grammed at the time of the fault.
To Next Page
Loading...
