York YVAA - Before Applying Power to the Chiller, Ensure the Chilled Liquid System is Filled; Removing Water;Glycol from the Evaporator; Evaporator Freeze Damage; Glycol Concentration

JOHNSON CONTROLS
176
FORM 201.28-NM1.1
ISSUE DATE: 1/31/2018
The following factors can be used to convert from
English to the most common SI Metric values.
TABLE 34 - SI METRIC CONVERSION
MEASUREMENT MULTIPLY ENGLISH UNIT BY FACTOR TO OBTAIN METRIC UNIT
Capacity Tons Refrigerant Effect (ton) 3.516 Kilowatts (kW)
Power Horsepower 0.7457 Kilowatts (kW)
Flow Rate Gallons / Minute (gpm) 0.0631 Liters / Second (l/s)
Length
Feet (ft) 0.3048 Meters (m)
Inches (in) 25.4 Millimeters (mm)
Weight Pounds (lbs) 0.4536 Kilograms (kg)
Velocity Feet / Second (fps) 0.3048 Meters / Second (m/s)
Pressure Drop
Feet of Water (ft) 2.989 Kilopascals (kPa)
Pounds / Square Inch (psig) 6.895 Kilopascals (kPa)
TEMPERATURE
Example: (45.0°F - 32°) x 0.5556 = 7.22°C.
To convert a temperature range (that is a range of 10°F)
from Fahrenheit to Celsius, multiply by 5/9 or 0.5556.
Example: 10.0°F range x 0.5556 = 5.6 °C range.