YSI 556 MPS - Introduction; Unpacking the Probe Module

YSI 556 MPS YSI Incorporated
Page 19
3. Probe Module
3.1 Introduction
The YSI 5563 Probe module is used for measuring dissolved oxygen,
temperature, conductivity, and optional pH and ORP. The probe module is
rugged, with the sensors enclosed in a heavy duty probe sensor guard with
attached sinking weight. A 4, 10 or 20 meter cable is directly connected to
the probe module body making it waterproof. An MS-19 connector at the
end of the cable makes the YSI 5563 fully compatible with the YSI 556
Multi-Probe System.
3.2 Unpacking the Probe Module
1. Remove the YSI 5563 Probe Module from the shipping
boxes.
NOTE: Do not discard any parts or supplies.
2. Use the packing list to ensure all items are present.
3. Visually inspect all components for damage.
NOTE: If any parts are missing or damaged, contact a YSI
representative immediately. Refer to: Appendix E Customer
Service o visit www.ysi.com.