System Setup Section 10
YSI Incorporated YSI 556 MPS
Page 87
10.10 Barometer Units
The following information is only for instruments with the barometer
option.
1. Go to the system setup screen as described in Section 10.1
Accessing the System Setup Screen.
2. Use the arrow keys to highlight the Barometer units
selection on the system setup screen. See Figure 10.2 System
Setup Screen.
3. Press the Enter key. The Barometer units screen will appear.
Figure 10.5 Data Filter Screen
A black dot indicates the currently selected units.
4. Use the arrow keys to highlight your desired barometric unit.
5. Press the Enter key to select your choice. A black dot will
appear in the circle next to your selected units.
6. Press the Escape key repeatedly to return to the main menu
screen.
To Next Page
Loading...
