YSI 556 MPS - Page 87

System Setup Section 10
YSI Incorporated YSI 556 MPS
Page 81
2. Use the arrow keys to highlight the Date & time selection on
the system setup screen. See Figure 10.2 System Setup
Screen.
3. Press Enter. The date and time setup screen is displayed.
Currently selected
date format
4-digit yea
r
selected
Figure 10.3 Date Setup Screen
NOTE: A black dot to the left of a date format indicates that
format is selected.
4. Use the arrow keys to highlight your desired date format.
5. Press Enter.
6. Use the arrow keys to highlight the 4-digit year selection.
7. Press Enter. A check mark appears in the check box next to
the 4-digit year selection.
NOTE: If unchecked, a 2-digit year is used.
8. Use the arrow keys to highlight the Date selection.
9. Press Enter. A cursor appears over the first number in the
date.