separately arranged on StEP2-StEP4, StEP5-StEP7, StEP8-StEP10. Settings are as follows:
t- 1=-2.0 Execute the program of curve 1 (StEP2-StEP4)
t- 1=-5.0 Execute the program of curve 2 (StEP5-StEP7)
t- 1=-8.0 Execute the program of curve 3 (StEP8-StEP10)
Note: Can choose the curves by setting the value of StEP “t-1“ set to -2.0, -5.0 or -8.0 before the program startup.
To Previous Page
Loading...