1.4 TECHNICAL SPECIFICATION
Input type: (Either of below specifications can be used selectively in the one instrument)
Thermocouple: K, S, R, E, J, N, T, B, W R e 3 -WRe25, WRe5-WRe26.
Resistance temperature detector: Cu50, Pt100
Linear voltage: 0～5V, 1～5 V , 0 ～1V, 0～100mV, 0～2 0 m V , 0~500mV etc.
Linear current (external precise shunt resist needed): 0～10mA,0～20mA, 4～20mA, etc.
Extended input (install I4 module in MIO) : 0～20mA, 4～20mA or two line transmitter.
Optional: apart from the above-mentioned Input type, an additional type can be provided upon request.
(Graduation index is needed)
Instrument Input range
K(-50～1300℃), S(-50～1700℃), R(-50～1700℃), E(0～800℃), J(0～1000℃), N(0～1300℃), T(-200~+350℃),
B(200~1800℃)
Cu50(-50～+150℃), Pt100(-200～+600℃)
Linear Input: -9990～30000 defined by user
Measurement accuracy : 0.25%FS ± 1 measurement unit
Resolution : 0.1℃ for K, E, T, N, J, Cu50, Pt100; 1℃ for S,R
Temperature shift : ≤0.015%FS /℃ (typical value is 80ppm/℃)
Sampling period : read A/D converter 8 times per second
To Next Page
Loading...