to use the instrument correctly and make it to its full use.
● Please correctly set parameters according to input / output type and function. Only correctly wired
instruments with parameters correctly set can be put into use.
1.2 Ordering Code Definition
Advanced modularized hardware design is utilized for AI series instruments. There are maximum five module slots:
multi-function input/output (MIO), main output (OUTP), alarm (ALM), auxiliary output (AUX) and communication
(COMM). The modules can be purchased together or individual, and can be assembled freely. The input type can
be set to thermocouple, RTD, or linear current/voltage.
The ordering code o f A I -526/AI-526P (V8 .2) series instrument is made up of 9 p a r t s . For example:
AI－526
A N X3 L5 N S4 － 24VDC – (F2)
② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
It shows that the model of this instrument is AI-526, front panel dimension is A s i z e ( 96×96mm), no module is installed
in MIO slot, X3 linear current output module is installed in OUTP (main output), A L M (alarm) is L5 (dual relay contact
output module), no module is installed in AUX (auxiliary output), S4 (RS485 communication interface module) is
installed at COMM , and the power supply of the instrument is 24VDC, an extended input type (F2 radiation type
pyrometer) is available
To Next Page
Loading...