③ Shows the module type of multiple functions I/O (MIO). Selectable modules are I2, I4, K3 and V, etc. N means
no module been installed.
④ Shows the module type of main output (OUTP). Selectable modules are L1,L2,L4,W1,W2,G,K1,K3,K5,K6, X3 ,X5
etc.
⑤ Shows the module type of alarm (AL M) . Selectable modules are L1, L2, L4, L5, W1, W2, G, etc.
⑥ Shows the module type of auxiliary output (AUX). Selectable modules are L1, L2, L4, L5, W1, W2, G, K1, X3,
X5, etc.
⑦ Shows the module type of communication (COMM). Selectable modules are S, S4, V , etc.
⑧ Shows the power supply of the instrument. If left blank, the power of the instrument is 100~240VAC. Added
"24VDC" means the power supply of 20~32V DC or AC power
⑨ Shows the optional extended graduation spec (If none, leave it blank). AI-526 series instruments support m a n y
input types including popular thermocouples, RTDs, linear voltage, current and resistance inputs. If needed, an
additional specification not mentioned in input type selection (InP) table can be extended.
Note 1: The instrument applies the technology of automatic zero and digital calibration, and is free of maintenance.
If the error exceeds certain range, generally, cleaning and drying the inside of the instrument can fix it. If not, send the
instrument back to the factory to examine and repair.
To Next Page
Loading...