Sakura Multifunction Rice Cooker by Yum Asia
2.2 CONTROL PANEL DISPLAY
Press and hold the ’START’ touch button for 2 seconds to start the cooking programme.
Press and hold the ’CANCEL’ touch button for 2 seconds to cancel the cooking
programme. Sakura will then go to standby mode with the display flashing. This button
also doubles as an on/off button by pressing and holding longer than 2 seconds when
Sakura is in standby mode.
press of the button moves through the menu and the selected programme flashes on
the display.
selects 1 of 3 refined rice cooking programmes (long grain, short grain and brown).
Each successive pressing of the ‘RICE’ button selects the next programme from the
menu list and the name of programme selected flashes on the display.
If the unit is in stand-by mode (i.e. no programme is in use) pressing and holding the
‘KEEP WARM’ button for 2 seconds activates KEEP WARM mode and the ‘KEEP WARM’
button lights up. A count-up clock appears for your reference and the ‘KEEP WARM’
button stays lit.
The ‘PRESET’ function allows you to set a timer for delayed cooking of up to 24 hours.
Beware of setting this for too long in the future if there are perishable foods among the
contents of the dish you are cooking.
For adjusting the cooking times for non-rice cooking menu settings and the preset
function. Pressing one of these buttons when a programme has been selected allows
you to adjust the cooking time.
Default cooking times are listed under the specific manual sections for different
programmes.
To Next Page
Loading...
Need help?
General
