YY-Electron Wireless Home Security Alarm System User Manual

yy-electron.inc 9
A．To trigger the smoke detector, depress the clear plastic button on
the face of the smoking detector. You will hear a double beep sound
to indicate that it has been activated.
B. To trigger the gas detector, depress the white plastic button on the
face of the gas detector. You will hear a
double beep sound to
indicate that it has been activated.
C. To trigger the glass break detector, knock your glass window with
any metal. Until you hear a
double beep sound from your wireless
keypad controller to indicate that it has been activated.
Each smoke/ gas detector/glass break detector has to be individually activated using this procedure.
Program Emergency Feature for your gas detector, smoke detector & glass break detector.. (this step is to make sure these
sensors are working around the clock to protect your home and your family even when your system is not armed).
with your system in programming status (see page 5), enter the number below into the keypad/controller. In the place of {06
to 08} enter the number you have chosen for the smoking detector, gas detector, glass break detectors.
【 7 2

(06 to 08) 2 # 】

YY-Electron Wireless Home Security Alarm System Specifications

General

Brand	YY-Electron
Model	Wireless Home Security Alarm System
Category	Security System
Language	English