yy-electron.inc 12
Program Functions
Setting the Exit Delay Time/ Arm Delay Model.
This function allows you to activate your system while providing you with time to exit your premises without triggering
the alarm system; you can adjust the delay time from zero (
00) to thirty (30) minutes. With your system
in
programming status(see page 5), enter the number sequence below, and where the {00 to 30} appears enter the
delay time you wish (up to 30 minutes).
The default factory setting for delay time is one minute.
【 5 5 (00-30) # 】
Setting the Entrance Delay Time/ Disarm Delay Model.
This function allows you time to enter your premises when your alarm system is armed without triggering the alarm
system. The entrance delay time can be set from zero (
00) to thirty (30) minutes. With your system in programming
status(see page 5), enter the number sequence below into your keypad. In place of the {00 to 30}, enter the delay
time (up to 30 minutes).
The default factory setting for delay time is zero minute
.
【 5 6 (00-30) # 】
Setting Siren Sounding Time/ Silent Alarm Model.
This function allows you to set the length of time your siren will sound; you have a range from silent alarm (00) up to
thirty (
30) minutes. The factory default setting is three (01) minutes. With your system in programming status(see
page 5),
enter the number below into your keypad. In place of the {00 to 30}, enter the length of siren sounding time
from zero (
00) to thirty (30
) minutes.
【 5 4 (00-30) # 】
To Next Page
Loading...
Need help?
General