Z-EDGE R1 - Adjusting the Settings

-11-
While the dash camera is in standby
Pause
2020/04/20 11:53:00
P
1080P
WDR
1 2 3 4 65
7
8
9
10
11
1213
1. Pause 8. Settings
2. Resolution 9. Camera
3. WDR 10. Payback
4. Parking Mode 11. Record
5. Motion Detection 12. Date Time
6. Audio Recording Status 13. Battery
7. Wi-Fi
3.3 Adjusting the Settings
Customize the video recording and other general settings via the on-screen
display (OSD) menus:
If the device is recording, short press the 'OK
' button (11) to stop and enter
Standby Mode.
1. Press the 'Menu
' button (8) to enter the General Settings menu.
2. Press the 'Up
' and 'Down' buttons (9 & 10) to select a menu option and press
the 'OK
' button (11) to enter the selected menu.
3. Press the 'Up
' and 'Down' buttons (9 & 10) to select the desired setting and
press the 'OK
' button (11) to confirm the setting.
4. From the General Settings menu, press the 'Menu
' button (8) to exit the menu.