2 GETTING STARTED
2.1 Inserting the TF/Micro SD card
• Insert a TF/Micro SD card into the TF/Micro
SD Card Slot (5), with the pins facing towards
the back of the device, until it clicks into
place.
• To remove, push the edge of the TF/Micro
SD card inward until you feel it click, then
allow it to push out until you can remove it
from the slot.
WARNING:
• It is recommended to format the TF/Micro SD card before initial use.
• Please note that all data saved on the TF/Micro SD card will be erased
after formatting.
• Do not remove or remove or insert the TF/Micro SD card whilst the device
is powered on - this may damage the TF/Micro SD card.
• Supports up to 128GB (Class 10 or above).
2.2 Front Camera Installation
1. Slide the car mount into the slot on top of the device until a click sound is
heard.
2. Turn the camera on (see 2.4 & 2.5 for more details). Whilst looking at the
display screen find a suitable location for installing your dash cam on your
front windshield. Please note:
a. This position should neither distract the driver nor block the driver's view
whilst driving. We recommend locating it towards the top of the windshield,
behind the rear-view mirror and positioned slightly closer to the driver's side.
Find a position that provides an unrestricted and full viewing angle for the
camera.
b. This position should be clean so that the suction cup mount can attach to the
surface firmly. If not, please clean the surface using water if necessary and
wait until dry.
-4-
To Next Page
Loading...
Need help?
General
