Z-EDGE Z3Pro User Manual

-13-
Menu Feature Description Option
Set the Time ZoneTime Zone GMT -12 to GMT +12
Firmware VersionVersion Info
Set
Feature
Set
OK
Restore device to factory
default settings
Adjust the sensitivity of
G-Sensor the G-Sensor
(see 3.7).
Default
1 Hour, 2 Hours,
4 Hours, Off
Set the fatigue Alarm
notification
Driver Fatigue
Alarm
On / Off
Prompt when low light
detected
Remind lights
On / Off
Enable/Disable Motion
Detection
Motion Detect
Off / High / Medium /
Low
Format the memory card.
Warning: Formatting will
erase all data
Format OK
G-Sensor
Sensitivity
Enter Driver IDDriver ID Setting
Enable/Disable Key ToneButton Beep On / Off
Use ‘Up’ & ‘Down’
Buttons to select and
‘OK’ Button 6 to confirm
Settings
Set FrequencyFrequency 50Hz / 60Hz
Enable / Disable WDRWDR
Adjust the Auto LCD Off
delay
LCD Auto Off Off / 1 Min / 3 Mins
On / Off

Z-EDGE Z3Pro Specifications

General

Brand	Z-EDGE
Model	Z3Pro
Category	Dash Cameras
Language	English