Z-EDGE Z3Pro User Manual

2.3 Adjust Device Position
Loosen the nut to swivel the device vertically. Click into place and secure by
tightening the nut. Rotate the device horizontally for a clear view.
2.4 Connecting to Power
Use only the supplied car charger to power the dash cam and charge the
built-in battery.
1. Plug the USB cable (15) on the
car mount into the car
dash cam's USB connector (2).
2. Plug one end of the USB
charging cable into the USB
Connector on the car mount (17).
3. Plug the other end into the car
charger, and insert that into
your vehicles lighter socket.
-6-

Z-EDGE Z3Pro Specifications

General

Brand	Z-EDGE
Model	Z3Pro
Category	Dash Cameras
Language	English