USING THE STAND
DETACHING THE COVER FROM THE KEYBOARD
The cover of the Flex keyboard folds to form a triangular stand that holds
most smartphones or tablets sized 10.5-inches or smaller at a convenient
viewing angle.
The Flex keyboard and cover are attached magnetically. To detach the cover
from the keyboard, hold one of the top corners of the keyboard with
one hand, and with the other hand on the corresponding top corner of
the cover, pull directly up. This will disengage the magnets holding the
keyboard and cover together.
1
POWERING ON AND OFF
The Flex keyboard can detect when the the cover is folded over it.
1 . When the cover is folded over the keyboard, the keyboard turns
itself o automatically.
2. When the cover is folded back away from the keyboard, it
automatically turns itself on.
PAIRING YOUR FLEX KEYBOARD WITH YOUR DEVICE
Your Flex keyboard can pair with virtually any smartphone or tablet as well as
your smart TV!
1 . Ensure your device’s Bluetooth
®
connection is on.
2. Press the or key on the Flex keyboard for three seconds.
A blue LED light on the DELETE key will begin pulsing, indicating
your Flex keyboard is in pairing mode.
3. Your device will display “ZAGG Flex” as an available pairing
option. Select it and complete any other pairing steps based
on your device.
4. To pair your Flex keyboard with another device repeat steps 2
and 3. To toggle between devices, simply press or .
5. Once paired, the LED light on the DELETE key will turn o. Once
begun, if the Flex keyboard doesn’t complete pairing after 60
seconds, it will abort the process. If this happens, repeat steps 2 and 3.
1
1
2
2
To Next Page
Loading...
Need help?
General
Weight and Dimensions
