3855 South 500 West Ste Q | Salt Lake City, Ut | 84115 | 801.506.7081
24
Vibration 1. Sample size: 2 PCs
2. Condition: Sine sweep: 10HZ~ 500HZ~
10HZ;
3. Sweep speed: 0.5 Octave/minute
4. Acceleration: 2G
5. Duration: 30 minutes per face.
6. Judgment Standard:
i) The mechanical appearance and inner
structure should not be damaged after test.
ii) No functional failure should be found during
and after the test.
Vibration machine
4.5 Bare Unit Drop Test
Test Item Specification Test Equipment
Bare unit drop
test
1. Test Condition : Drop at 100cm (39.37in)
on wood surface, 5 times on each corner
and 5 times on the top and bottom ( Total
30 times with device)
2. Test Condition with tablet : Drop keyboard
50cm on wood surface, each corner 2
times and 2 times on the top and bottom
( total 12 times)
3. Judgment Standard
i) No malfunction (button, mechanical or
electrical)
ii) No deviation or destruction of
component (No major cracks in plastic
housing)
Drop machine
4.6 Packaged Box Drop Test
Test Item Specification Test Equipment
Packaged box
drop test
10 drops from 1 meter to steel surface, No
damage, function OK ( Refer to
ISTA_1A_2001 standards )
Drop test machine
To Next Page
Loading...
